OJ Electronics WLM3, Руководство по установке

Страница: 15 / 56

© 2015 OJ Electronics A/S
BR1026A09
a
© 2015 OJ Electronic
A/
S
Channal
selector
-G
B
Jumper
Button learning
mode
Learning mode button
BR1026A09a
15
room sensors - wireless setup
WLxx3-29 wireless room sensors/controllers must be paired with a WLM3 master for wireless
communication.
To achieve this:
1. On the master, switch on DIP-3 to activate learning mode.
2. Initialize all wireless room controllers/sensors:
- Initialize analogue room sensors (WLTA3, WLTD3 and WLTM3) by removing the plastic battery pull
tab or pressing the internal initialization button (learning mode button) until a beep is heard.
- Initialize digital room controllers/sensors (WLCT3 and WLDT3) by pressing the pinhole button
(learning mode button) beside the clock or I symbol until a beep is heard.
When communication with a room controller/sensor has been established, the corresponding channel
LED on the master will light up.
3. Switch off DIP-3 to deactivate learning mode.
Fig. 11a
Fig. 11b
installation