Parts adjustments and replacements
28
7.5
Replacing the passing plate
CAUTION:
Turn OFF the power switch before starting to replace and adjust the passing
plate.
Use the passing plate, rail and escaper that correspond with the diameter of the screws
loaded.
The following are passing plate numbers which correspond with the model numbers:
•
1.0
～
1.7 corresponds with Model No. SW1017
•
2.0
～
3.0 corresponds with Model No. SW2030
Please check that the model numbers correspond with the screws that can be used.
Remove the passing plate.
Do not lose the attached bolts. Using bolts other than those supplied with this machine may
result in a malfunction.
When installing, use the half-press on both sides of the passing plate as guides.
After replacement, make the adjustments that correspond with the screws loaded.
Attaching bolt
Passing plate
Half-press
(Provided on each side
of the passing plate.)
