Adjustments and checks before use
21
5.9
I
nstalling the additional “Nejikura” Screw hopper
We have, as an attachment, "Nejikura" which supplies a constant amount of screws,
automatically.
To use "Nejikura", take off the upper cover of the screw feeder NSRI type and put on
"Nejikura".
"Nejikura"
•
Detects, by sensor, the amount of screws in the scooping chamber of the screw feeder.
•
Continues to supply screws automatically as the sensor detects the amount of screws, in
the scooping chamber, to be decreasing.
•
Two other "Nejikura", that fit the NSRI type, are the SR-80 Floor type(Table-Top) and the
T-510S Tower type.
•
If space above the screw feeder is limited, choose the SR-80 Floor type(Table-Top). If
there's enough space above, choose the T-510S Tower type.
To order, please contact your dealer.
The example for setting the "Nejikura"
SR-80 Floor type
The example for setting the "Nejikura"
T-510S Tower type
