－
8
－
◆
Check/adjustment of the bit guide
Check the position of the bit guide.
* Adjust the bit guide to a position where a user can easily take
screws.
Actually pick up screws a few times to adjust it.
Adjust it by loosening the attaching screws.
Caution:
The rail is adjusted according to the physical rela-
tionship with the sensor as on the preceding page, so basically
the rail is not adjusted here.
◆
Adjustment of the left and right guide pieces
Please check and adjust position of the guide piece as necessary.
The bit guide is originally set at approximately 3mm at the front
opening, and shall be adjusted as needed by the user.
- Unfasten the front fixing screws, insert driver-bit to be used and
adjust the slit opening, so that the bit can move freely.
- After the adjustment, try to pick up a screw and check its working
condition before turning on the power.
Guide attaching screws
Right guide plate
Left guide plate
Driver bit
Adjust the guide plate
The bit guide attaching screws
(Assy. attachiing
screws)
Adjustment
Bit guide
Screw
