OHTAKE NJ-2320, Руководство по эксплуатации

Страница: 6 / 26

Type Model number Screw nominal
diameter
Exchange Kit
number
Rail model
number
Passage plate
model number
NJ-2320 φ2.0 R20SET R20 W2320
NJ-2323 φ2.3 R23SET R23 W2323
NJ-2326 φ2.6 R26SET R26 W2326
NJ-2330 φ3.0 R30SET R30 W2330
NJ-4535 φ3.5 R35SET R35
NJ-4540 φ4.0 R40SET R40
NJ-4550 φ5.0 R50SET R50 W4550
NOTE: Replacement rails and passage plates are available as options.
In the Exchange Kit ordered separately, rails and passage plates are included.
W4540
NJ-23
NJ-45
４．
Checks and Adjustments before Operation
４
-
1
．
Confirming the machine’s Model Number
Before using this machine, verify that the model matches the screw size to be used.
To confirm the model number, note the labels attached to the rail assembly . The identification label marking is in R** form.
This machine can be converted to different screw sizes by replacing the rail assembly, and the passage plate. When you replace
component parts, verify the actual screw size to be used.
This machine is factory adjusted for pan-head screws prior to shipment. If readjustments are needed to match the screw
applied, complete the following check/adjustment procedures before using this machine.
-
４
-
-Checking and adjusting the brush -Checking and adjusting the holding plate (screw guide 1)
-Checking and adjusting the passage plate -Checking and adjusting the rail assembly
Rail label
Rail assembly
Before performing any adjustment procedures, please turn off the power
CAUTION