OHTAKE NJ-2320, Руководство по эксплуатации, Страница: 20 / 26

-
１８
-
Problem
Cause Remedy
7-8
The machine comes
to a sudden stop.
-The overload protection circuit is activated.
-The screw in pick-up section has not
been removed for a long period of time.
-Turn the power switch off and then back on.
If the operation comes to a stop again, the probable
causes are: There are too many screws in the screw
bin.
--> Adjust the number of screws in the screw bins.
A screw or foreign object is trapped in the movable
section.
--> Remove any trapped screw or foreign object.
-Pick up the screw.
7-9
The bin scooping
plates fail to stop
moving when there is
the screw in pick-up
section.
-The timer setting control is improperly
adjusted.
-Readjust the timer setting control.
7-10
Screws have been
dropped inside the
machine.
-The holding plate (screw guide 1) is
improperly adjusted.
-The front-rear position of the rail is
improperly adjusted.
-Readjust the holding plate (screw guide 1).
-Readjust the front-rear position of the rail.