OHTAKE Nejikura SR-80, Руководство по эксплуатации

Страница: 5 / 18

- 4 -
Do not use any screw that is out of the specified range nor any screw that is oily or dirty.
Do not allow any foreign material to enter the machine while in operation.
Do not put your fingers into the machine while in operation, otherwise an injury will result.
Use only the AC adpater supplied with this machine otherwise it may result in a fire or electric shock.
Do not install this machine in an unstable location otherwise it may fall causing damage or injury.
When moving the machine, always disconnect the AC adapter from the wall outlet or it may result in damage to
the cord, or cause a fire or electric shock.
Turn off the machine and unplug the AC adapter from the wall outlet during closing hours or if the machine will
be unused for any extended period of time.
Do not operate this machine in overly humid or dusty conditions.
Keep the plug socket clean at all times otherwise it may cause a fire or electric shock.
Do not operate the machine with tension on the AC adapter cord.
Keep the cord loose and untangled.
Always operate the machine with the upper cover in place, otherwise it may result in injury.
CAUTION
When moving the machine, be sure to hold it with both hands and be careful not to drop it.
Dropping the machine at your feet may cause injury.
Properly adjust the amount of screws replenished from the machine to the automatic screw feeder.
If the replenishment is excessive, the automatic screw feeder may stop. Refer to 5-1 for adjustment.
Adjustment of screw sensor and 5-2. Adjustment of rotating drum operation time.