OHTAKE Nejikura SR-80, Руководство по эксплуатации

Страница: 9 / 18

- 8 -
3. Minor adjustment
1) After the adjustments of screw sensor and rotating time specified in paragraphs
1 and 2, fill Nejikura with the screws.
2) Operate the unit and check how it works. Adjust the screw sensor and timer if it
is necessary. It is recommended to set the supplied amount of screw in Automatic
Screw Feeder small to avoid the clogging of screws.
Appropriate amount of screw
in Automatic Screw Feeder
4. Screw retaining cover
When mount the screw retaining cover, loose the screw of two height adjustment plates.
(Refer to photo 1)
Although a cover is inserted from this side of an Automatic Screw Feeder, the adjustment plate of the side enters be -
tween a sensor and an Automatic Screw Feeder then.(Refer to photo 2)As shown in photo 2, two adjustment plates
are fixed after a set in the stabilized position, looking at the level of a cover. (Refer to photo 3)
Photo 1 Photo 2 Photo 3 Photo 4
Front height
adjustment plate
Side height
adjustment plate