ohmex ROB 4600, Инструкция по эксплуатации и техническому обслуживанию

Страница: 57 / 60

Fig. 13
Fig. 14 Fig. 15
Fig. 11 Fig. 12
ROB 4600
57
EN
3.c - Compatible connection mode (AP mode - Fig. 13)
This mode can be used if the device does not connect in “General connection mode”
1. Click on “ SMALL HOME APPLIANCE “. Then click on “ ROBOT VACUUM ”.
2. Enter the Wi-fi password of the connection and click “ Next ” to reset the device.
3. Hold the “ ” (2) button down for 3-5 seconds until the device emits two “beeps”, then release the button,
the relative LED on the robot first flashes quickly and then slowly.
4. Click “ Next ” to finish the reset. Select “ Hotspot Network ” on your mobile phone, enter the network
setting interface, click “ Connect ” to enter the wi-fi setting of your mobile phone.
If interfacing is not successful, repeat the steps described above.
5. Select “ SmartLift-XXXX ” to return to the “ Smart Life ” APP (Fig. 14) .
Enter the network waiting state
(Fig. 15)
.
Once connected to the device, go back to the “ Smart Life - Smart
Living “ app.
3. Enter the Wi-fi password on the connection and click “ Next ” (click to
connect after searching for the device)
(Fig. 11-12)
.
If interfacing is not successful, repeat the steps described above.