ohmex FAN 4040 WTR, Инструкция по эксплуатации

Страница: 68 / 72

64
EN
FAN 4040 WTR
2. Insert the batteries (CR2025 type).
RESPECT THE POLARITIES!
3. Reposition the battery slot cover.
PREPARING THE APPLIANCE
2 3
If the remote control is not
operated for prolonged periods of
time, the batteries will discharge
and the remote control won’t
work; in this case, replace the
batteries with the new ones.
The remote control batteries
must not be exposed to excessive
heat such like sun rays, flames or
similar.
> > Remote control range
Do not submit the remote control to strong vibrations or shocks.
Store the remote control away from moisture and water.
If the remote control doesn’t work
after replacing the batteries,
remove and reinsert the batteries
after waiting about 5 minutes.
It could result difficult to work with
the remote control if the sensor on
the appliance is exposed to direct
sunlight or to a strong artificial light.
Try to make it work away from such
bright sources.
Avoid dropping the remote control,
exposing it to impacts or stepping
on it.
Do not pour water on the remote
control.
Do not use the remote control with
other appliances simultaneously.
If the appliance doesn’t work even
when using the remote control from
a close distance, it is necessary to
replace the batteries.
•
The remote control batteries must be kept away from the range
of children. If they’re handled in the wrong way they could
cause fires or chemical burns.
• Do not expose the batteries to temperatures higher than 100° C.
• Do not charge or disassemble the batteries.