ohmex FAN 4040 WTR, Инструкция по эксплуатации

Страница: 64 / 72

60
EN
FAN 4040 WTR
Any stickers or advertising leaflets applied on the grid, must be removed
before using the appliance.
Before assembling the fan, ensure that it is not plugged into the
mains.
The fan can be used only if completely and correctly assembled, i.e.
complete with base with support and protective grid. If in doubt,
have it checked by professionally qualified personnel or ask them
to assemble it.
a. Insert the 2 support rods (10) into the
base (11) and fix them using 2 screws
for every rod. Each rod (10) has 2 holes
on one side.
The side with the holes must be
installed in the base (11). Each rod has
2 screws already installed; first loosen the screws and then screw them to the bas to
fix the rods and tighten them.
b. Position the heavy base (12) under the base (11)
and fix it with the relevant screws.
c. Make sure that the bases are
assembled correctly,
as illustrated.
PREPARING THE APPLIANCE
10
11
NO! OK