Manchester - England
Version 7.0 01/02/2019
4
2. Safety
2.1. General Safety
Installation and setup of CORA arrays should be carried out by an Ohm quali
fi
ed
technician.
The technician responsible should ensure that all
fl
ying points and suspensions are
suitable for their intended use and pass rigging inspection and safety tests.
All equipment should be inspected for quality before use. If any of the CORA
loudspeakers or associated rigging appear faulty please withdraw these from use
and contact Ohm for repair.
2.2. Load Capacity
The C-AF (CORA array frame) is designed to suspend a maximum total load of…
• 8 x CORA-S: 333.40 kg (including
fl
ying frame but no cabling)
Or…
• 12 x CORA array: 283.80 kg (including
fl
ying frame but no cabling)
Or…
• 2 x CORA-S and 8 x CORA array: 266.40 kg (including
fl
ying frame but no cabling)
2.3. Wind Load
Flying loudspeakers outside in wind conditions higher than 6 ft (22-27 knots, 39-49
km/h, 25-31 mph) is not recommended. If the wind force exceeds this lower and
secure the array.
WARNING!
Potential risk of personal injury and material damage!
