Manchester - England
Version 7.0 01/02/2019
12
4. CORA Array Setup
4.1. Preparation
Before you
fl
y or ground stack the array you must design the array using Ohm’s
pro-A-sync simulation software. This ensures correct acoustical and mechanical
deployment of the array.
PDF’s can be generated from within the software and printouts made to assist the
riggers with the suspension points, chain hoists and pick/pin points.
Inspection before setup:
Clear the working area before setting up and lifting the array.
Check the condition of the chain hoists, their positions and ensure chains are not
twisted.
Visually inspect all the loudspeaker cabinets and their associated rigging. Any
damaged components must be withdrawn from use immediately.
