Manchester - England
Version 7.0 01/02/2019
14
CORA-S
CORA-S utilises separate steel sub links to connect the subwoofer to the array frame
or one CORA-S to another CORA-S. Inserting a steel sub link in each corner of the
subwoofer allows the connection of the frame on the top or bottom of the cabinet.
For mixed arrays of CORA/CORA-A array and CORA-S, two array frames must be used
where CORA/CORA-A array cabinets are
fl
own beneath CORA-S. CORA-S must only
be deployed at the top of the array and should not be used within clusters of CORA/
CORA-A array loudspeakers in one array hang.
Pin A
Pin B
CORA-S array
frame section
Steel sub link
Remove pin B
from the steel
sub link.
Remove pin B from the steel
sub link. Locate the steel sub
link over the top of CORA-S
array frame section
Place steel sub link
into the CORA array
frame section lining up
the holes.
Replace pin B into the hole on the
CORA array frame section and
through the steel sub link.
Repeat procedure above on all four corners of the CORA-S, the sub is now ready to connect to the array
frame or other CORA-S as per instructions on page (18)
1
3
2
