OHAUS Ranger RC, Инструкция по эксплуатации

Страница: 42 / 58

6 Event and error messages
Error Cause Remedy
Display Dark
•
Back lighting set too dark Set back lighting (
b.LIGHt
)
brighter
•
No mains voltage Check mains
•
Unit switched off Switch on unit
•
Mains cable not plugged in Plug in mains plug
•
Brief fault Switch device off and back on
again
Insufficient load
•
Load plate not on the scale Place load plate on the scale
Set to zero
•
Weighing range not reached
Overload
•
Weighing range exceeded Unload scale
Reduce preload
•
Result not yet stable If necessary adjust vibration
adapter or weigh dynamically
•
Function not permissible Unload scale and set to zero
•
Zeroing not possible with over-
load or insufficient load Unload scale
•
Average piece weight too low Select and place larger number of
reference parts on the scale
•
No valid value from the reference
scale Check cable connection between
the units
Check interface settings
•
No calibration Unplug the mains plug then plug
it back in; switch unit off and then
back on in battery mode
Calibrate scale
Call OHAUS Service
•
Average piece weight too low Counting is not possible on this
scale with this average piece
weight
Ranger RC Event and error messages
42