OHAUS Ranger RC, Инструкция по эксплуатации

Страница: 26 / 58

Ranger RC
26
Settings in the menu
4.3 Scale settings (SCALE)
4.3.1 SCALE1/SCALE2 – Selecting scale
This menu item only appears if an analog second scale or a weighing platform is con-
nected.
4.3.2 CAL – calibration (adjustment)
This menu item is not available for certified scales without internal calibration weight.
4.3.3 DISPLAY – weighing unit and display accuracy
Internal For scales with an internal calibration weight:
1. Unload scale.
2. Activate menu item
CAL
with Yes . The scale calibrates with the internal calibra-
tion weight.
-Int CAL-
appears in the display. After calibration is completed,
-donE-
appears briefly in the display, and the scale automatically returns to
weighing mode.
External For scales without an internal calibration weight:
1. Unload scale.
2. Activate menu item
CAL
with Yes . The scale determines the zero point.
–0-
appears in the display. The calibration weight to be placed on the scale then
flashes in the display.
3. If necessary, change the weight value displayed with
No
.
4. Place the calibration weight on the scale and confirm with
Yes
.
The scale calibrates with the calibration weight loaded. After calibration is com-
pleted,
-donE-
appears briefly in the display, and the scale automatically returns
to weighing mode.
UNIt1
Select weighing unit 1: g, kg, oz, lb, t
UNIt2
Select weighing unit 2: g, kg, oz, lb, t
rESOLU
Select readability (resolution), model-dependent
UNt.rOLL
When
UNT.rOLL
is switched on, the weight value can be displayed in all available
units and as pieces with
Count Weight
.
Notes
•
On certified scales, the weighing units oz and lb are displayed with the symbol *.
•
On certified scales, resolutions that deviate from the scale definition are displayed
without a weighing unit and with the symbol
*
.
•
On dual-range/dual interval scales, resolutions marked with
|<–> 1/2|
are
divided up into 2 weighing ranges / intervals, e.g. 2 x 3000 d.