OHAUS Ranger R31P(E)1502, Инструкция по эксплуатации

Страница: 20 / 40

EN-18
Ranger™ 3000
Series
4.6 Unit Menu
This menu activates units so they will be accessible with the Units button. The units in the menu
m
ust be turned “on” to be active.
Note: Available units vary by model and local regulations.
4.7 Print1 Menu
Enter this menu to set printing parameters. Default settings are bold .
Note: The Print2 menu is only displayed if a second interface is installed.
Reset [
reset
]
Reset the Print menu to factory defaults.
NO = no reset
YES = reset
Stable Only [
Stable
]
Set the printing criteria.
OFF = values are printed immediately
ON = values are only printed when the stability criteria are met
Reset: no , yes
Stable Only: off , on
Auto Print: off
on stable
interval
continuous
accept
Content: Result (-> off, on )
Gross (-> off , on)
Net (-> off , on)
Tare (-> off , on)
Header (-> off , on)
Footer (-> off , on)
Mode (-> off , on)
Unit (-> off, on )
Info (-> off , on)
Accu (-> off , result, all)
Layout: Format (-> S ,M)
Feed (-> Line , 4 Lines, form)
Data Transfer: off , on
End Print: Exit menu