OHAUS Ranger R31P(E)1502, Инструкция по эксплуатации

Страница: 24 / 40

EN-22
Ranger™ 3000
Series
Alternate command [
Alt.CmM
]
Define command character for the Print, Tare and Zero commands
Print
Set the alternate command character for Print
A to Z.
Tare
Set the alternate command character for Tare
A to Z.
Zero
Set the alternate command character for Zero.
A to Z.
End COM1, End COM2 [
End
]
Advance to the next menu or return to the top of the current menu.
4.9 Lock Menu
The Lock menu is a software controlled option which can lock menu settings to prevent
tampering.
Reset [
reset
]
Reset the Lock menu to factory defaults.
NO = no reset
YES = reset
Lock Cal [
l.CAL
]
Set the status.
OFF = Calibration menu is not locked
ON = Calibration menu is locked
Lock Setup
Set the status.
OFF = Setup menu is not locked
ON = Setup menu is locked
Lock Read
Set the status.
OFF = Readout menu is not locked
ON = Readout menu is locked
Reset: no , yes
Lock Cal: off , on
Lock Setup: off , on
Lock Read: off , on
Lock Mode: off , on
Lock Unit: off , on
Lock Print: off , on
Lock COM: off , on
End Menu Lock: Exit menu