OHAUS Ranger R21PE15, Инструкция по эксплуатации

Страница: 3 / 44

Ranger™ 2000
Series EN-1
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the
Ranger™ 2000 Series. Please read the manual completely before using the scale.
1.1 Safety Precautions
Please follow these safety precautions:

Verify that the AC input voltage printed on the data label matches the local AC
power supply.

Do not drop loads on the platform.

Make sure that the power cord does not pose a potential obstacle or tripping
hazard.

Use only approved accessories and peripherals.

Operate the scale only under ambient conditions specified in these
instructions.

Disconnect the scale from the power supply when cleaning.

Do not operate the scale in hazardous or unstable environments.

Do not immerse the scale in water or other liquids.

Do not place the scale upside down on the platform.

Only use weights within the scale’s capacity as specified in these instructions.

Service should be performed only by authorized personnel.
2. INSTALLATION
2.1 Package Contents

Scale

Pan

Power Cord

Instruction Manual

Warranty Card
2.2 Installing Components
Install the pan as shown below. Press to lock the pan into place.
Figure 2-1. Installing the pan