OHAUS Ranger R21PE15, Инструкция по эксплуатации

Страница: 25 / 44

Ranger™ 2000
Series EN-23
4.8 Print Menu
Enter this menu to set printing parameters.
Reset [
reset
]
Reset the Print menu to factory defaults.
NO = no reset
YES = reset
Stable Only [
Stable
]
Set the printing criteria.
OFF = values are printed immediately
ON = values are only printed when the stability criteria are met.
Auto Print [
A.Print
]
Set the automatic printing functionality.
OFF = disabled
ON.STAB = printing occurs each time the stability criteria are met.
INTER = printing occurs at the defined interval
ACCEPT = printing occurs each time the display is within the Checkweigh
accept range and stability criteria are met.
CONT = printing occurs continuously
When ON.STAB is selected, set the condition for printing, where:
LOAD = printing occurs when the load is stable and greater than zero
LOAD.ZR = printing occurs when any load is stable and equal to or greater
than zero.
When INTER is selected, set the Print Interval.
1 to 3600 (seconds)
Reset: no , yes
Stable Only: off , on
Auto Print: off , on stable, interval, continuous, accept
Content: Result (-> off, on )
Gross (-> off , on)
Net (-> off , on)
Tare (-> off , on)
Header (-> off , on)
Footer (-> off , on)
Mode (-> off , on)
Unit (-> off, on )
Info (-> off , on)
Accu (-> off , result, all)
Layout: Format (-> S ,M)
Feed (-> Line , 4 Lines, form)
Data Transfer: off , on
End Print: Exit menu