OHAUS Ranger Count 2000 Series, Инструкция по эксплуатации

Страница: 4 / 36

EN-2 Ranger
™ Count 2000
Series
2.3 Selecting the Location
Use the scale on a firm, steady surface. Avoid locations with excessive air current,
vibrations, heat sources, or rapid temperature changes. Allow sufficient space
around the scale.
2.4 Leveling the Equipment
The Ranger Count Series has a level indicator as a reminder that the scale should
be leveled for accurate weighing. To level the scale, adjust the feet so the bubble is
centered in the circle.
Be sure the equipment is level each time its location is changed.
Figure 2-2. Level indicator
2.5 Connecting Power
AC power is used to power the scale when battery power is not needed. First,
connect the AC power cord (supplied) to the power input jack then connect the AC
plug to an electrical outlet.
Figure 2-3A. Connect the
AC power plug to the input
jack on the back of scale.
Figure 2-3B. Connect the AC
power plug to the proper AC
supply.
Level Indicator
Adjustable feet