OHAUS Ranger Count 2000 Series, Инструкция по эксплуатации

Страница: 20 / 36

EN-18
Ranger™ Count 2000
Series
Stable Only [
Stable
]
Set the printing criteria.
OFF = values are printed immediately
ON = values are only printed when the stability criteria are met.
Auto Print [
A.Print
]
Set the automatic printing functionality.
OFF = disabled
ON.STAB = printing occurs each time the stability criteria are met.
INTER = printing occurs at the defined interval
ACCEPT = printing occurs each time the display is within the Checkweigh
accept range and stability criteria are met.
CONT = printing occurs continuously
When ON.STAB is selected, set the condition for printing, where:
LOAD = printing occurs when the load is stable and greater than zero
LOAD.ZR = printing occurs when any load is stable and equal to or greater
than zero.
When INTER is selected, set the Print Interval.
1 to 3600 (seconds)
Content [
CONtNt
]
Define the content of the printed data.
Part Number
Set the status.
OFF = disabled
ON = the part number is printed
Result
Set the status.
OFF = disabled
ON = the displayed reading is printed
Gross
Set the status.
OFF = disabled
ON = the gross weight is printed
Net
Set the status.
OFF = disabled
ON = the net weight is printed
Tare
Set the status.
OFF = disabled
ON = the Tare weight is printed