EN-20
Defender 6000 Indicators
3.4
Percent Mode
Use this application to measure the weight of a sample displayed as a percentage of a pre-established
reference weight.
3.4.1 Enter the Mode
To enter the percent mode from any application mode:
1. Press and hold the
Mode
button until
PErCNt
is displayed.
2. When the
Mode
button is released, the display shows
CLr.rEF
and the % icon.
3. If you need to clear the stored reference weight of the last time, press the
Yes
button. Then go to step 5.
Note:
If captured weight is more than or equal to 1d or is less than or equal to -1d, the display will show
CLr.PAN
until the sample is removed from the pan.
4. If you need to recall the stored reference weight of the last time and continue to use it, press the
No
button
and start percent weighing.
Note:
If no reference weight has been previously stored, step 3 and 4 will be omitted.
5. The display shows the
PUt.rEF
and the % icon.
3.4.2 Establish a Reference Weight
To establish a reference weight:
Follow the previous step 5. When you see
PUt.rEF
displayed on the screen, place the specified quantity of
samples on the pan and press the
Yes
button to capture the current stable weight.
Note:
You can press the
【】
button to tare. The center of zero, PT or NET icons will light as appropriate.
For i-DT61PW model, during the capture process, the display shows
- - - - -
.
If the reference weight is less than 100d during the capture process, the display will show
rEF.Err
for 1.5
seconds and then return to showing
PUt.rEF
. Please replace the samples on the pan and press the
Yes
button to re-establish a reference weight.
3.4.3 Start Percent Weighing
1. Place a sample on the pan and read the percent. The current percent value and % icon are displayed.
2. Press the
Function
button
to temporarily display the reference weight.
rEF.wWt
is displayed for 0.5
seconds. Then the reference weight value is displayed for 1.5 seconds in the current unit of measurement.
Note:
Please refer to
Check
in the
Weighing Mode
section for how to use Check in the Percent Weighing
mode.
3.4.4 Application Settings
The application can be customized for user preferences. Please refer to
Application Settings
section in
Weighing Mode
for details about how to enter application settings.
The Percent Weighing Configurations are defined below (defaults in Bold).
Note:
you cannot disable Percent if you are in the mode currently.
Item
Available Settings
Comments
Percent
（
PerCNt
）
On
, Off
To enable Percent Weighing
Содержание Defender 6000
Страница 2: ......