OHAUS Courier 1000, Инструкция по эксплуатации

Страница: 7 / 17

Courier 1000 EN-3
1.3. Control Functions
Figure 1-2 Courier 1000 Control Panel
Button
Primary Function
(Short Press)
On/Zero

Turn on the scale.

If the scale is On, set the
display to zero.

Perform tare operation.
Units

Change the weighing unit.

Enter Dynamic Weighing or Weigh
Alert Mode.

Initiate countdown in Dynamic
Weighing mode.
Secondary Function
(Long Press)
Off

If the scale is on, long press to
turn off the scale.
Cal

Perform the calibration process.
Figure 1-3 Display
Elem
ento Descripción
1
Low Battery Indication:
The battery symbol on the left side of the display indicates a low battery condition.
When first displayed, approximately 12 hours of operation remain. When the
battery is fully depleted, the scale will momentarily display “Lo bAt” and shut off.
2
Large 7-Segment Numeric Characters:
Weight (mass) values are shown using 4 digits including negative sign and
decimal places. Prompts for calibration and possible error conditions are also
shown using these digits.
3
Stable Reading Indication:
A * will appear in the lower left corner of the display to indicate when the reading is
stable.
4 / 6
Weighing Unit Indication:
The weighing unit selected appears on the right side of the display
5
Dynamic Weighing Mode Indication:
A • will flash next to the selected unit during this mode.
1
2
3
4
5
6