HOW TO OPERATE MACHINE
3. Turn the fuel cock to "OPEN"
Whenever the terms "Right", "Left", "Forward"
and "Reverse" are used in this manual, they
indicate the directions from the operator
facing forward looking into the hopper.
4. If cold move the choke lever to CLOSED before
starting the engine. Move back to OPEN after
1. Make sure that the Brake Handle is in the UP
engine starts.
position.
5. If engine is not cold, you may start engine with
choke in the OPEN position.
6. Switch the Engine Switch to ON.
2. Rotor clutch lever should be in the "OFF"
position.
7. Grasp recoil start cord , to a compression
position, pull smoothly and with sufficient vigor.
8. After the engine starts, allow the engine to warm
up for 1-2 minutes with low running speed.
If recoil start cord is used 3 or more time in a row
engine may flood. Move the choke lever to OPEN
and throttle lever to full throttle and try again.
Too much fuel in the engine cylinder makes it
difficult to start the engine.
CAUTION
STARTING THE ENGINE
BRAKE HANDLE
CLOSE
OPEN
Read the Pre-Operating Safety
Checklist
and Pre-Operating Machine Checklist
before starting the engine.
DANGER
ON
OFF
CLOSE
OPEN
ON
OFF
- 15 -