12
The Motor Body can be rotated though 360 degrees, in ei-
ther direction, during operation. This feature is particularly
useful when working in awkward or narrow areas as it al-
lows the operator to position the tool in the best position for
easy operation.
The function of the Return Valve is to allow the Cutter Rod
to return to the starting position if it is unable complete a cut
or becomes jammed. Using supplied hex wrench, loosen
Return valve about half a turn in anticlockwise direction.
This will release the oil pressure and allow the Cutter Rod
to return. Retighten the Return Valve once the Cutter Rod is
fully returned and before starting the next operation.
* Loosen the Return valve screw anticlockwise by 1/2 turn (HCC-16DF)
Rotating Function of Motor (HCC-16DF & HCC-19DF)
Return Valve Operation (HCC-16DF& HCC-19DF)
Note: Keep the air hole in the end of the Bar Holder clear of
dirt and debris. The air hole controls the internal pressure
and should not be obstructed.
Keep your hands and face
away from the blades, the
moving parts and the cutting
area, during operation.
Remove the Battery from
the tool immediately after
use.
WARNING
When cutting rebar of a high tensile strength the cut piece
may fly off and cause serious injury to the operator. Wear
safety glasses and confirm that the surrounding area is
safe before starting operation.
WARNING
Operating procedure
Air Hole
Hex wrench
Built-in Return Valve
Rebar
HCC-19DF
Blade
Rebar
Stopper
