Effective April 2006
37
SCREEN 3
In order to activate the MAIN
CONTROL you must chose either
CONTINUOUS or AUTOMATIC.
Selecting either one will cause the
Generator to begin Cycling. To stop
the Generator from cycling Press
STOP.
NOTE: That whenever the
Generator has Power supplied
to it the Power Status will Read
GENERATOR ON.
The Indicator Button;
POWER STATUS represents
the Generator having proper
supplied power.
The Indicator Button;
CONTINUOUS MODE
represents if CONTINUOUS
is selected in the main control.
If any other option is selected
on the MAIN CONTROL
Switch CONTINUOUS
MODE will read off.
If CONTINUOUS is selected, the
generator will run in Continuous Mode,
in this case the generator will cycle
(producing Oxygen) as long as the
generator is ON! If the AUTOMATIC is
selected, the generator will run in
Automatic Mode. This mode allows a
pressure switch to be set which can be
adjusted on the next screen.
Содержание OG-75
