Installation & Operation Manual Merlin 1000V
Rev: 02 05-22
5
Circuit Board Overview
Damage to PCBs when creating cable entry points may void any warranty!
Any damage attempting to remove the circuit board may void any warranty!
Wiring: Power Input
100-240V~ Mains Power should be supplied to the [POWER / LINE IN]
terminal and fused at 3A.
On connecting the mains supply to the panel, the red power LED indicator will light up
–
this is located
on the front cover (OGS Logo).
Wiring: Gas Solenoid Valve
Pressure sensors should be screwed to the downstream port of the valve.
100-240VAC electrical power supplied from the [VALVE OUT] connector using a 3-core cable can be
connected to a gas solenoid valve which can shut the gas supply on alarm status.
Refer to your valve manual for more information and wiring!
