OGGI SG-16
HARDWARE MOUNTED GATE
FEATURE & COMPONENTS
SET-UP
This gate is suitable for openings between 24’’ and 43’’ wide.
Step 1
Measure the width of the opening you wish to place the gate
in. Adjust the two gate sections to one of the five numbered
positions (A-G), according to the size of the opening you intend
to fit the gate in.
Step 2
Align the holes on both gate sections. Secure the gate by faste-
ning 2 ‘B’ screws into 2 ‘C’ screws on the top of the gate and 2
‘B’ screws into 2 ‘C’ screws on the bottom of the gate. Do not
attempt to fasten the gate using only one screw.
Step 3
Screw the wall-cup screws ‘D’ and the nuts ‘A’ into one side of
the gate. Screw both hinge-bars ‘E’ into the other side of the
gate.
Step 4
Mark the position for the wall-cups ‘G’ and ‘F’ on the opposite
wall surface to where you want the gate to hinge from. The top
D
x2
A
x2
B
x2
C
x2
E
x2
F
x1
G
x1
H
x2
I
x1
J
x2
1
3
2
screws not provided
A
B
C
D
E
X = 24'' 26,8''
X = 26,8'' 29,1''
X = 29,1'' 31,9''
X = 31,9'' 35''
X = 35'' 37,4''
F
X = 37,4'' 40,2''
G
X = 40,2'' 42,9''
X
A
B
C
D
E
F
G
B
A
D
C
E
110207-lara-a5-userguide-oggi.indd 2
18.02.2011 15:42:21
