User’s Manual Wireless Module
Page 9 of 22
3. Software Installation
Mentioned: The following information just describes the procedures of software installation
under Windows system. As for those under Linux, Android, the OEM integrator must do their
own specific embed system programming, the procedures is entirely different.
To install the driver of the module, please use administrator user account to login before the
following steps:
Tips: the latest original drivers can be down loaded from the website of Ralink chipset
manufacturer. The current website is
http://www.ralinktech.com/en/04_support/support.php?sn=500
To find a correct driver, please identify the chipset type applied in the module you have.
For Windows XP:
The system will detect a new hardware has been added, and start the “Found New
Haerdware Wizard”. Click on “Cancel”.
1.
Please insert the disc into your CD-ROM drive. The disc should auto start, dispaying
the following window, If it does not start due to the system setting, open the browser
window, find the autorun.exe file in your CD-ROM folder, click to run it.
2.
Ralink has integrated all the 54Mbps 802.11b/g ,150Mbps or 300Mbps 802.11n driver
into one file. Click to run the “Driver Installation”
Notes: Because Ralink often updates software, the drivers contained in the disc
might be changed without prior notice.
3.
Follow the instructions and prompts of the “InstallShield Wizard” to finish the driver
installation:
a. Select the “I accept the terms of the license agreements”, then click the “Next”.
b. There shows a setup type window, you can select “Install driver only” or “Install driver
and Ralink WLAN utility” and then click the “Next”.
