Ogden BCH610, Инструкция и список запасных частей

Страница: 10 / 19

8
CAUTION: When attaching the PTO Driveline make sure the yoke is
properly locked on the shaft.
Always have the Mower in the working position when attaching to the Mower Carrier and
always have the Mower Carrier attached to a Tractor.
Attach the Mower to the lift arms on the Mower Carrier. Be sure to install and tighten the 3/4” x
6 ½” Hex Capscrew and ¾” Nylock Nut.
Attach the Top Link between the Mower and Mower Carrier. To adjust the Mower angle, screw
the Top Link in or out. Consult the Mower Operator’s Manual for the most efficient angle.
Lengthen any Mower Locking Mechanism cords so they reach the tractor cab.
B
B
e
e
f
f
o
o
r
r
e
e
O
O
p
p
e
e
r
r
a
a
t
t
i
i
n
n
g
g
Attach the Mower PTO Driveline between the Tractor and Mower Carrier.
Attach the PTO Driveline that came with the Mower Carrier between the Mower Carrier and the
Mower.
CAUTION: When attaching the PTO Driveline make sure that the
Yoke is properly locked on the shaft.
WARNING: Operate only with 540 RPM PTO
Connect the Hydraulic Hoses for the Mower Carrier to the Tractor.
Connect the Hydraulic Hose for the Mower to the tractor.
Start the Tractor and engage the Hydraulics to check for proper operation.
CAUTION: Always attach the Mower Carrier to a Tractor before
folding or unfolding the Cutter Bar. Failure to do so could result
in damage to the implement and or possible personal injury.