OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
9
44.
Reconnect the pressure manifold to the inlet valve pressure assembly.
45.
Remove the outlet cell cap assembly.
46. Remove the ceramic disk and save the filter cake for later analysis.
47.
Discard any remaining test fluid.
48.
Screw the t-handle into the piston and push the piston to the bottom of
the cell.
49. Close the pressure release valve on the pump and the ball valve on the
pressure manifold.
50.
Disconnect the pressure manifold from the inlet pressure assembly.
51.
Remove the inlet pressure assembly and inlet cell cap assembly.
52.
Clean and dry the entire cell assembly.
