OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
17
Software
Operation
1. Click “Start Test”.
2.
Enter the necessary information. The following fields do not affect your
test. The information will print on the report when the test is complete:
- Customer Info
- Additives
- Cement Mfr.
- Test Name
- Cement Density
- Cement Class
- Density Units
- Job Type
The following fields do affect your test:
-
DAQ Time (mm:ss): determines how often test data is saved to file
- Alarm: sets the consistency alarm. Be sure to use the same
consistency units set in the “Setup” screen.
3.
Select a “Test Profile”. Test profiles are built in the Test Builder. Refer to
page 18 for instructions.
4.
Click “OK” to start the test.
If the computer is disconnected from the Consistometer or loses power,
the test will not stop. Be sure to stop it manually. Refer to page 25 for
instructions on stopping a test manually.
5. When the test is complete, click “Stop”.
