OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
10
Setup
Eurotherm
The Eurotherm Model 3504 controls the temperature and displays the
pressure. When running a test with the computer, the software automatically
programs the controller. However, when running a test without the computer,
the controller must be programmed manually. It is strongly recommended
that operators carefully study the Model 3504 instruction manual before
attempting to program the controller.
When running a test without the computer, always build the program prior to
mixing the slurry and loading the slurry cup.
The Eurotherm 3504 can store up to eight custom programs. Each program
consists of multiple segments. In a segment, the temperature setpoint can be
changed or held for a certain amount of time.
Each program also can consist of two channels; one for temperature and one
for pressure. Since the Benchtop Consistometer does not offer automatic
pressure control, only Channel 1 should be programmed.
Selector
Temperature
Pressure
Page
Scroll
To edit a program:
1. Press the “Page” button until the display reads “Program Edit”.
2. Use the up and down arrows to select the program you want to edit.
3. Press the “Scroll” button to move to the Channel parameter.
4. Use the up and down arrows to select Channel 1.
Programming Channel 2 is not supported on the Benchtop
Consistometer.
