Officezone MightyLam 2700, Руководство по эксплуатации

Страница: 6 / 26

” Unplug the laminator before moving it or when it is not in use for an extended
period of time as a precaution against the possibility of an internal malfunction
that could create a fire hazard.
” Do not operate the laminator with a damaged power supply cord or plug, or after
it malfunctions or has been damaged in any manner.
”
Keep the power cord away from hot or wet surfaces.
” Do not overload electrical outlets beyond their capacity as this can result in fire
or electrical shock. This unit is rated at 15 amps and should be the only item
plugged into a 15 amp branch circuit. When connected to a 20 amp branch
circuit any items in addition to the ML27 must not exceed 4 amps.
” Adjust only those controls that are specified in these Operating Instructions.
” Do not attempt to service or repair the laminator yourself. Unplug the laminator
from the electrical outlet and contact an authorized service representative under
any of the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled into the laminator or it has been exposed to water.
• If the laminator has been subjected to excessive jarring through being
dropped or bumped.
• If the laminator does not operate normally when following the operating in-
structions.
• KEEP THE LAMINATOR OUT OF THE REACH OF CHILDREN.
INTRODUCTION
Congratulations on your purchase of the ML27 Roll Laminator. This unit is designed
to provide years of trouble-free service.
The ML27 will accept rolls of laminating film up to 27” wide in all film thicknesses.
Paper and card stock up to 1/16” (1.6mm) thick may be laminated
without adjusting the rollers.
2
1-800-543-5454 www.officezone.com
OfficeZone