Officezone MightyLam 2700, Руководство по эксплуатации

Страница: 16 / 26

TROUBLE SHOOTING
The following guide will assist you with most problems that may be encountered when
laminating.
PROBLEM: Laminator is inoperative. Motor does not run, indicator lights
are out.
ACTION: Unit may be unplugged. Connect power supply.
Ensure that your circuit breaker has not tripped.
Fuse may have blown. Replace fuse (back next to power cord) with 15amp
BUSS (MDA-15).
PROBLEM: Laminating film and item being laminated move through lamina-
tor erratically.
ACTION: Check thickness of item to be laminated. Maximum thickness is 1/16”
(1.6mm) if rollers have not been adjusted.
Clean heat shoes of residual adhesive. Refer to MAINTENANCE section
for cleaning instructions.
PROBLEM: Plastic is not bonding to the item or to itself at the edges.
ACTION: Make sure heat shoes and rollers are at proper operating temperature and
have had time to warm up. See table 1 for the suggested temperature
ranges.
PROBLEM: Wrinkles appear on the laminated items running parallel with the out-
side edges.
ACTION: Increase roller tension on top and/or bottom supply rolls.
Reduce heat shoe temperature.
Clean heat shoes of residual adhesive. See MAINTENANCE section for
cleaning instructions.
12
1-800-543-5454 www.officezone.com
OfficeZone