How to Adjust for Steering
If your Freewheel is not tracking straight when coasting forward on level ground, the
steering should be adjusted. To do this you need to adjust two separate fasteners:
Front Set Screw, and;
Main Steering Stem Bolt
1. The Front Set Screw holds the steering adjustment.
2. After loosening the Front Set Screw (3/32" allen or 2.5mm allen wrench) and Main
Steering Stem Bolt, rotate the fork to adjust the steering straight..
3. If the internal bushing is not rotating relative to the frame, then tighten the ball ad-
juster knob to lock the fork to the internal bushing. Work the bushing loose from the
frame. I like to re-grease this joint to keep it from binding.
4. Set the steering and then tighten the Front Set Screw.
5. Finish by tightening the Main Steering Stem Bolt.
6. Test for straightness by coasting on a flat surface.
Note: The front ball adjuster knob can be backed off for light steering action or screwed
in for heavier steering action.
Front Set Screw
Ball Adjuster Knob
Main Steering Stem Bolt
Page 7
