STEP TWO
A. Start by loosening the Bearing
Race using a 13 mmm flat
wrench (found at any bike
shop).
B. Turn wrench CLOCKWISE to loosen.
Do this on BOTH sides.
C. Once both sides are loosened, use 3mm
allen wrench to remove Axel Screw.
D. Once the Axel Screw is removed there
may be a washer that needs to be installed
between the Fork and the Axel when you
re-assemble.
STEP THREE
A. Assemble in the reverse order, remember-
ing to install the washer(s), if applicable.
B. Install Axle Screw all the way in.
C.
Do the final tightening of the Bearing Race
by turning the 13 mm flat wrench COUN-
TER CLOCKWISE. This needs to be done
on BOTH sides (tightens the bearing race
against the inner side of the fork).
Page 8
How to Remove Wheel for Tire/Tube Change
Axel Screw
Bearing Race
Axel
Washer
Axel Screw
NOTE: The wheel may not spin as easily at this time. This is
normal and will spin easily after re-assembly.
STEP ONE:
Do NOT use a 3mm allen wrench
and try to loosen the Axle Screw. It will not
move and is easily stripped
.
Fork
