Important notes
Wrist support
The Dynamics wrist support
stabilises
the wrist by means of its compressive effect
and additional aluminium reinforcement.
The gentle compression encourages blood
circulation and reduces swelling rapidly.
←
Fitting instructions
The fitting instructions in pictures can be found on the fold-over
page at the beginning of the brochure.
1
To put on the wrist support, please open all Velcro fasteners. Pull the
support over the wrist in such a way that the hand and thumb opening
are pointing away from your body and the aluminium splint is on the
inside of the wrist.
2
To fix the position of the bandage, attach the separate Velcro tape to the
middle Velcro fastener and close it. Then lead the tape around the wrist
and close it.
3
Now close the other Velcro fasteners. Please ensure that the product is
secure but not too tight in order to prevent pinching.
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
product.
Ofa Bamberg wishes you a speedy
recovery!
Please note
– The initial adjustment and strap-
ping on of the product must be
carried out by qualified specialist
staff. The aluminium splint can
be moulded when cold.
– Wear the product directly on
your skin. If it has to be worn in
combination with other products,
then please discuss this in ad-
vance with your doctor.
– If you experience an unpleasant
sensation, intense pain or any
other problem when wearing the
product, then remove it and con-
tact your doctor or specialist sup-
plier.
– We use a comprehensive quality
management system to check our
products. However, should there
still be reasons for complaint,
please contact your specialist
supplier.
036_OT14_OFA_545105051_Handgelenkstuetze_innen.indd 8
31.07.2014 15:11:43
