5
The unit must not be placed or operated in areas jeopardised by fire or
explosions. During working at fuel stations the “Technical Rules for flammable
Liquids” (TfbF) to be considered.
Consumables to be handled thoroughly. Technical safety regulations and
environmental rules to be followed. Machine not to be started in case power
cable, plugs, switches, etc. are defective.
Extension cables to have a diameter according to VDE regulations. Extension
cables on reels to be reeled off completely, in order to avoid overheating of the
cable reel.
Machine not to be started in case power cable, plugs, switches, etc. are
defective.
When opening the machine in case of malfunction or emergency, the unit to be
switched off by means of the ON/OFF switch and to be disconnected from the
electrical network.
Electric energy can cause severe injuries. Electrical components thoroughly
and frequently to be checked for damages and malfunctions, in order to avoid
any cause for accidents. All repair work to be carried out by qualified
personnel. Disconnect the unit from the electrical network during all
repair/maintenance work. (ZH 1/95).
Make sure that the unit cannot move. In case the unit is equipped with a brake;
it should be activated during working in steep areas.
During loading suitable lifting eyes to be foreseen. Balanced load to be
ensured.
Repair work within the high pressure section of the machine (pump, hoses,
piping) only to be carried out by qualified engineers.
The exhaust evacuation area is hot! Do not touch!
After work the spray pistol to be protected against accidental/unauthorised use
by means of the safety lever.
According to safety rules (BlmSchV) the oil-heated high pressure cleaner
to be inspected within 4 weeks after delivery. Exhaust gas measurements
to be taken and to be repeated yearly.
