background image

 3 
 

1. 

Introduction

 

With your OERTZEN high pressure cleaner you have purchased one of the 
most durable and reliable machines available on the market. Its balanced ratio 
of water flow (temperature) and working pressure meets all cleaning require-
ments. The OERTZEN high pressure cleaners conform to all and European 
safety regulations which is guaranteed by the CE symbol. 
 

  This manual to be made available to the operating personnel and to be 

read completely before start-up. 

 

  We underline that we cannot be held responsible for any damages or 

malfunctions as a result of ignoring this manual. 

 

 

OERTZEN offers training courses in order to enable the operating 
personnel to run the machine in accordance with the instructions 
laid down in this manual, to carry out all necessary maintenance 
work described herein and to eliminate minor repair work. 

 

This warning symbol appears in this operating manual at all opera-
ting and safety instructions dealing with the dangers for personal 
entirety and life (DIN 4844). 
 
 
This warning symbol appears in the operating manual at all opera-
ting and safety instructions dealing with the fulfilment of rules, 
regulations and instructions for the proper operation and to avoid 
damages or destroying of the machine. 

 
This manual is subject to alteration. 

 
All rights reserved. Any use in other than legally authorised cases requires the 
prior written approval of ARNDT H. von OERTZEN (GmbH&Co). 
 
 

 

 

Содержание M 320

















Отзывы: