11
After Work
Reduce motor load by decreasing working pressure (open valve at double
lance, respectively by turning the adjusting wheel of the unloader valve
counter-clockwise), in order to cool down the motor after work.
Close and lock spray pistol.
Motor stop: Tumbler to be in position "0".
Thoroughly clean and reel up high pressure hose.
Exclusively original OERTZEN hoses to be used, otherwise warranty and
product liability will be nil and void.
Unit to be stored in a dry, frost-proof place.
Drain pump completely for extended shut-down periods.
Particularly note:
In case of malfunctions stop the machine immediately, eliminate malfunction
according to chapter „Trouble Shooting“, respectively call qualified service
personnel.
Frost-protection is a must in order to avoid severe damages on the machine
(refer to chapter Maintenance and Care).
