6. Operation
6.1 Front
Panel
shows the front panel of the DISPLAY ONE.
Figure 6 – Front Panel
A
Display of measuring value and status message
B
Display unit and Set point status
Display
Description
8.8.
Measured value or status message
8.8.8.8.
mbar, Pa, Torr
Pressure unit
SP
Switching function status
When the icon lights up the pressure is below
the lower threshold.
If the icon does not light up the pressure is above
the upper threshold.
Table 4 – Display Structure and Description
6.2
Switching On and Switching OFF
6.2.1 Switching
On
•
Witch the mains switch on.
After switching on the
DISPLAY ONE
will operate the following:
•
Self
test
•
Display
test
•
Display of the used software version
•
Identify
transmitter
•
Activate the measurement mode
14
GA 09.034/2.02 – 07/10
