5. Installation
5.1
Scope of Delivery
Description
Number
DISPLAY ONE
1
Mains cord
1
Manual
1
Edge protection
1
Rubber feet
2
Spare fuses
2
Mating connector
2
Table 3
–
Scope of Delivery
5.2 Mechanical
Installation
The DISPLAY ONE can be installed as follows:
•
Rack
installation
•
Bench top instrument
•
Panel
mounting
WARNING: Power disconnection
Set up or install the DISPLAY ONE in such a way that they can to operate or
place at any time the power switch you surely that a power disconnection is at
any time possible.
5.2.1 Rack
Installation
The DISPLAY ONE is designed for being installed into a rack according (19", 2 HU).
•
Affix the sub rack within the rack
•
Insert the DISPLAY ONE into the sub rack
•
Affix the DISPLAY ONE with 4 M2.5 screws with the instrument
5.2.2 Benchtop
Instrument
When wanting to use the DISPLAY ONE as bench top instrument, please proceed as
followed:
•
Lay the DISPLAY ONE on its rear side.
•
Push the edge protector on the bottom edge of the front panel.
•
Stick the rubber feet, supplied with the instrument, to the bottom of the housing.
•
Turn the DISPLAY ONE over again and place it at the desired location.
GA 09.034/2.02 – 07/10
11
