2
Operating Instructions and Parts Manual
23976/23977
12/18
2018 OEMTOOLS
™
3 SPEED EVAPORATIVE COOLER
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your evaporative cooler. Read this manual
carefully. Learn the evaporative cooler’s applications and
limitations, as well as potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
3. Keep children away. All children should be kept
away from the work area. Never let a child handle an
evaporative cooler without strict adult supervision.
4. DO NOT operate this evaporative cooler if under the
influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes
are impaired while taking drugs. If there is any doubt,
DO NOT attempt to operate.
5. Use safety equipment. Eye protection should be worn
at all times when operating this evaporative cooler. Use
ANSI approved safety glasses. Everyday eyeglasses
are NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat or hearing protection should be used in
appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties,
rings, bracelets or other jewelry may present a potential
hazard when operating this evaporative cooler. Keep all
apparel clear of the evaporative cooler.
7. DO NOT overreach. Keep proper footing and balance
at all times when operating this evaporative cooler.
8. Check for damage. Check your evaporative cooler
regularly. If part of the evaporative cooler is damaged,
it should be carefully inspected to make sure that it can
perform its intended function correctly. If in doubt, the
part should be repaired. Refer all servicing to a qualified
technician. Consult your dealer for advice.
9. Keep away from flammables. DO NOT attempt to
operate this evaporative cooler near flammable
materials or combustibles. Failure to comply may
cause serious injury or death.
10. Store idle evaporative cooler out of the reach of
children and untrained persons. Evaporative coolers
may be dangerous in the hands of untrained users.
11. Maintain your evaporative cooler with care.
12. DO NOT use a damaged evaporative cooler. Tag damaged
evaporative coolers “DO NOT USE” until repaired.
13. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one tool may become hazardous when
used on another evaporative cooler.
14. Evaporative cooler service must be performed only
by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a
risk of injury.
15. When servicing an evaporative cooler, use only
identical replacement parts. Use of unauthorized parts
or failure to follow maintenance instructions may create
a risk of injury.
16. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash and other debris.
17. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS™ for a replacement.
IMPORTANT SAFETY INSTRUCTIONS
The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations
that may occur. The operator must understand that common
sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
DISPOSAL
At the end of the useful life of the OEMTOOLS™ 3 Speed
Evaporative Cooler, dispose of the components according
to all state, federal and local regulations.
PRODUCT DESCRIPTION
The OEMTOOLS™ 3 Speed Evaporative Cooler works on
the principle of heat absorption by moisture evaporation.
Simply put, heat is removed from the air as water
evaporates. You feel this principle in action when you
step out of a swimming pool or shower and feel cool
as water evaporates from the surface of your skin. Your
evaporative cooler works on the same principle. The fan
pulls hot outside air through the wet cooling pads, where
the air is cooled by evaporation and then discharged from
the cooler.
PRODUCT SPECIFICATIONS - 23976
Size
37" H x 25" W x 17" D
Dry Weight
40 Lbs.
CFM 3,100
Cooling Area
Up to 950 sq. ft.
Motor Power
1/5 HP, 3 Speed
Water Capacity
10.3 Gallons
Input Voltage
115V AC, 1-Phase
Run Time
Up to 4 hours
PRODUCT SPECIFICATIONS - 23977
Size
45" H x 28" W x 17" D
Dry Weight
57 Lbs.
CFM
5,300
Cooling Area
Up to 1,600 sq. ft.
Motor Power
1/3 HP, 3 Speed
Water Capacity
14.6 Gallons
Input Voltage
115V AC, 1-Phase
Run Time
Up to 4 hours
