3
Operating Instructions and Parts Manual
23976/23977
12/18
2018 OEMTOOLS
™
3 SPEED EVAPORATIVE COOLER
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
WARNING
:
1. Unplug the evaporative cooler before moving it
or performing maintenance. DO NOT touch the
evaporative cooler when your hands are wet.
2. Those who are not qualified electricians should not
disassemble, repair or rebuild the evaporative cooler.
3. Unplug the evaporative cooler when it is not in use.
4. DO NOT unplug the evaporative cooler by holding the
cable cord. Unplug by holding the plug.
5. DO NOT use the evaporative cooler when there is
damage to the cable cord or plug.
6. Avoid the use of extension cords when possible.
Ensure that they are UL listed if they must be used. DO
NOT use a single extension cord to operate more than
one evaporative cooler. DO NOT plug the evaporative
cooler into any other cord-connected device (power
strip, surge protector, multiple outlet adapters, etc.).
7. DO NOT use the evaporative cooler close to any fire or
heat source.
8. DO NOT insert your hand or other objects into the rear
housing when the blade is moving.
9. To reduce the risk of fire or electric shock, DO NOT
use this evaporative cooler with any solid-state speed
control device.
10. DO NOT operate any evaporative cooler with a
damaged cord or plug. Discard the evaporative
cooler or return to an authorized service facility for
examination and/or repair.
11. DO NOT run cord under carpeting. DO NOT cover cord
with throw rugs, runners or similar coverings. DO NOT
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped
over.
12. DO NOT use if electrical cord is frayed or bent.
13. DO NOT immerse the evaporative cooler in water.
14. Confirm the rear panel is attached before operating.
15. This evaporative cooler is not intended for use by
people (including children) with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or
instructions concerning use of the evaporative cooler
by a person responsible for their safety. Supervise
children to ensure they do not play with the evaporative
cooler.
16. Always place the evaporative cooler on a stable, flat,
level surface when operating, to avoid the chance of
the evaporative cooler overturning.
17. To reduce the risk of fire or electrical shock, DO NOT
expose electrical connections to water.
18. DO NOT touch electrically live components.
19. Adequate ventilation is required.
ASSEMBLY INSTRUCTIONS
Evaporative coolers are pre-assembled and ready to
operate. Simply remove the packaging and then carefully
remove the unit from the box. Install the casters.
Casters
are located in the compartment on the bottom of the
cooler. Lock the 2 locking wheels before filling and turning
on fan to keep the cooler from moving from the air velocity.
Lay the cooler down.
Unscrew the two screws,
remove the bottom panel.
Take out: Casters (4)
Screws (16)
Garden Hose adapter (1)
Install 4 Casters.
NOTE
:
The media pad will have a slight odor when it is
new. This is normal. It will dissipate after a period of time
depending on the use time. Draining the tank often during
the break-in period will help speed this up.
OPERATING INSTRUCTIONS
1. Your cooler must be positioned in front of an open
window or door if it is to operate effectively.
2. Always ensure that there is another open window or
door through which the air can exhaust from the room.
3. Ensure the filter is kept clean throughout the summer
season.
4. At the end of each day, run your cooler on FAN ONLY
for 30 minutes to dry out the filter.
