BM/2/AS
General specifications and warning
GB - 4
1.3 - DESCRIPTION OF THE SYMBOLS
Many accidents are caused by a poor know-
ledge of and by a non compliance with the
safety regulations to put into practice during
the functioning and maintenance works to
be done on the machine.
In order to avoid any accidents, read un-
derstand and follow
all the warnings and
cautions contained in this booklet and those
written on the plates located on the machine.
To identify the safety messages included in
this booklet, following symbols have been
used:
DANGER
This symbol is used in the safety messages
contained in the booklet in case of potential
danger situations or possibility to cause
serious injuries or dead.
ATTENTION
This symbol is used in the safety messages
of the booklet for any danger situation that,
if disregarded, may cause small or modera-
te injuries or damages.
The message can be used also in case of
danger situations that may cause damages
to the machine.
☞
IMPORTANT
This symbol is used in case of precautio-
nary measures to be taken in order to avoid
any operation that may reduce the life of the
machine or for important communication to
the operator.
DANGER
For clarity reasons, some illustrations of
this booklet show the machine without sa-
fety guards. DO NOT USE THE MACHINE
WITHOUT SAFETY GUARDS.
Содержание BM/2/AS
Страница 74: ...BM 2 AS F 6 Transport et d semballage C B A Mod BM 2 AS A B C 765 765 1450 Chapitre 2 mesure en mm DIMENSIONS...
Страница 106: ...BM 2 AS Transport und Auspacken D 6 C B A Mod BM 2 AS A B C 765 765 1450 Abschnitt 2 Masse in mm AUSSENMASSE...
Страница 138: ...BM 2 AS E 6 Transporte y desembalaje C B A Mod BM 2 AS A B C 765 765 1450 Cap tulo 2 medidas en mm ESPACIO OCUPADO...
