Operating manual
DKS - classic DKS - expert
13
3
Parameter levels
3.1
Level 1 and 2
see the user operating manual doc. no. 112818.
3.2
Service level
In the service level a heating technician can make basic adjustments and queried
functions which give information about the correct mode of operation of the plant.
3.2.1
Operating data "dat"
Operating data can be queried, which is important for the plant operators and also
gives information about the interpretation and economy of the heating system, e.g.
the burner running times. More about this can be found in the user operating ma-
nual doc. no. 112818.
3.2.2
Switching output function on and off
This function serves the heating specialist for testing output functions. Each output
function may be selected and switched on or off for checking the components such
as pump, mixer etc. The system can be tested to check whether the switched-on
output function is correctly executed.
This function is not executable while operating in manual mode
.
During the checking of the output functions the control and security
functions are not in use. The specialist must continuously check the
condition of the plant, before and during this phase.
The exceeding of critical values must be prevented manually.
Operation step
Operation
Display
Select the heating circuit
(in case of setting on 7-0)
Select service level
D
B
DKS expert
DKS expert
D
A
