manualshive.com logo in svg

Odetics Telecom GPStarplus 365, Руководство пользователя

Поделиться
Скачать
Odetics Telecom GPStarplus 365 Скачать руководство пользователя страница 86

 

Odetics

 Telecom

GPStar

plus

  Model 365

 

  
 

365-8006

Display Menus and Controls  5 - 29

•

 

Press the Enter key to accept the selection, or press the Menu key to exit the
edit mode without making any selection change, or:

•

 

Press the arrow keys to enable 

(On)

 or disable 

(Off)

 the Differential output port.

•

 

Press the Enter key to accept the selection, or press the Menu key to exit the
edit mode without making any selection change.

 

 

5.5.2

Low Frequency Direct Digital Synthesizer (Other Option -2)

 

If the Low Frequency Direct Digital Synthesizer is installed, the version of the
Synthesizer option is displayed momentarily after the menu is accessed.

•

 

Press key 8 to view the type of option installed in the unit.

 

 Option Slot Menu                       

≡

 Synthesizer Installed - LF             

 

 

The above information screen is automatically replaced with the following screen.

 

 

 Synthesizer Frequency:100 000 Hz       

≡

 

 Differential:Off

 

 

This screen indicates the Factory Default settings for the LF Synthesizer version:
output frequency of 1 kHz (100000 Hz), and the Differential output port disabled (Off).
After subsequent application of input power, the screen indicates the frequency and
port setup selected by the user prior to the removal of input power. To change the
output frequency or to enable/disable the output port:

•

 

Press the Edit key to enter the edit mode.

 

 Synthesizer Frequency:100 000 Hz       

≡

 

 Differential:Off

•

 

Use the arrow and numeric keys to select the output frequency.

•

 

Press the Enter key to accept the selected frequency, or press the Menu key to
exit edit mode without making any changes in the output frequency, or:

•

 

Press the arrow keys to enable 

(On)

 or disable 

(Off)

 the Differential output port.

•

 

Press the Enter key to accept the selection, or press the Menu key to exit the
edit mode without making any selection change.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание GPStarplus 365



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды