ODB LCT6000, Руководство пользователя

Страница: 50 / 128

50
ODB COMPANY
800-446-9823
LCT6000
Maintenance Section
Figure 4.3b
4.3 Lubrcation, continued;
Grease fitting is behind rubber plug
Figure 4.3c
2. Trailer Wheel Bearings (figure 4.3b): Most of the units
are equipped with "EZ-Lube" grease fittings. This allows the
operator to grease the bearings without removing the hubs.
The "EZ-Lube" feature consists of axle spindles that have
been specially drilled and fitted with a grease zerk in their
ends (fig. 4.3c). When grease is pumped into the zerk, it is
channelled to the inner bearing and then flows back to the
outer bearing and eventually back out the grease cap hole.
The trailer wheel bearings should be checked and greased
after the first 30 days of service then at the beginning of
every season.
Grease specifications:
Thickener Point............................Lithium Complex
Dropping Point......................230 degr. C minimum
Consistency............................................NLGI No.2
Additives.........................EP,Corrosion & Oxidation
Inhibitors
Base Oil...................Solvent refined Petroleum Oil
Base Oil Viscosity............@40 deg. C 150cSt Min.
Viscosity Index.....................................80 Minimum
Pour Point...................................-10 deg. Minimum
Approved Sources:
Mobil Oil........................................Mobilgrease HP
Exxon/Standard......................................Ronex MP
Kendall Refining...............................Kendall L-427
Ashland Oil Co........Valvoline Val-plex EP Grease.
Penzoil.......Premium Wheel Bearing Grease 707L
For any questions concerning wheel lubrication please consult
the axle owner's manual supplied with your leaf collector or con-
tact the manufacturer or dealer.